The single-channel Classic Reverb Signature is Two-Rock’s ultimate tone shaping machine. This harmonically rich amp can be pushed into beautiful clean or overdriven tones while still retaining the guitar’s natural voice.
The Classic Reverb Signature is available as either a head or 1-12 combo in the following power configurations; 100/50 watt (4 x 6L6), 50 watt (2 x 6L6 tube rectified, or 40/20 watt (4 x 6V6). Built on either a black or silver anodized aluminum chassis, this amp features our proprietary output transformer, as well as an all tube analog spring reverb, 3 position Gain Structure switch, foot switchable FET circuit, tone stack bypass, and Reverb Defeat which gives this amp a wide range of tonal possibilities that has made the Classic Reverb Signature an integral part of so many artist’s tone. The three position gain structure switch changes the front end sensitivity and overall feel of the preamp. In the down position the amp feels similar to a vintage blackface, the middle position is much like the Two-Rock Matt Schofield Signature front end with a hotter input stage, and the full up position is our traditional Two-Rock front end. On 100 watt models the amp is switchable from 100 watts to 50 watts. Same goes for our 40 watt version which is switchable from 40 watts to 20 watts. On 50 watt models, the high power mode is fixed-biased and the low power mode is cathode biased. On our 100 watt and 40 watt output transformers, when switching wattages on the 100/50w and 40/20w models, our proprietary output transformer compensates for impedance and phase differences so there is no adverse change in tone or feel.
100w/50w (4) 6L6 (half power scaling)
Foot switchable FET, tone stack bypass, and reverb defeat. Seperate reverb send and return controls.